Model Number

CGLHJ-650/2200

Introduction??br />

  CGLHJ Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .It’s reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry  around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
  The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 ?? 10 minutes, cooling water pressure ≥ 0.2 mpa.
   Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished.

purposes??/strong>
  The device is widely used in the fields of metallurgy, chemical industry, metal mine, power plant, harbor and wharf where use the device to contact the belt joints. If users carry out vulcanization technics according to referred parameters, the pull intensity of the belt can be 90% comparing with the original one, not only the belt joints are smooth, but it’s almost the same with the original belt, and meanwhile it will weaken the abrasion to rollers, furthermore it can prolong the service life of conveyor and conveyor belt.

Data Sheet of Specifications:

	width of adhesive belts (mm)	Specifications	Size of heating plate  L × W (mm)	General Power (kw)	the weightiest fittings (kg)	Dimensions L × W × H(mm)	Total weight (kg)	Equipped
								Manual Pump	Electric Control Box
CGLHJ-650	650	650×830	830×820	9.8	56	1320×830×585	498	1	1
		650×1000	1000×820	11.8	66	1320×1000×585	560	1	1
CGLHJ-800	800	800×830	830×995	11.97	70	1450×830×585	585	1	1
		800×1000	1000×995	14.4	79	1450×1000×585	650	1	1
CGLHJ-1000	1000	1000×830	830×1228	14.7	82	1700×830×585	656	1	1
		1000×1000	1000×1228	17.8	95	1700×1000×585	696	1	1
CGLHJ-1200	1200	1200×830	830×1431	17.2	96	1950×830×750	884	1	1
		1200×1000	1000×1431	20.7	113	1950×1000×750	1000	1	1
CGLHJ-1400	1400	1400×830	830×1653	19.8	107	2150×830×900	957	1	1
		1400×1000	1000×1653	23.8	132	2150×1000×900	1180	1	1
CGLHJ-1600	1600	1600×830	830×1867	22.3	120	2380×830×900	1202	1	1
		1600×1000	1000×1867	27	146	2380×1000×900	1500	1	1
CGLHJ-1800	1800	1800×830	830×2079	24.9	137	2620×830×900	1347	1	1
		1800×1000	1000×2079	30	164	2620×1000×900	1600	1	1
CGLHJ-2000	2000	2000×830	830×2303	27.6	154	2830×830×900	1485	1	1
		2000×1000	1000×2303	33.2	182	2830×1000×900	1850	1	1
CGLHJ-2200	2200	2200×830	830×2478	29.7	165	2997×830×900	1546	1	1
		2200×1000	1000×2478	35.8	198	2997×1000×900	1900	1	1

other descriptions and back-order notice??/strong>

1. Voltage: 380 V or 660 V;
2. temperature :  arbitrary transfer between 0 and 200 ??;
3. Calefactive time (at normal temperature to 145 ?? :??0 min;  
4. Vulcanization pressure: ≤ 3.0 Mpa;
5. Time for vulcanization and heat preservation should be adjusted according to belts’ rigidity.
6. The belt joint length is relied on putting together of the vulcanizers.
7. Please confirm products’ models and mark the width of belts when ordering;
8. Spare electric pump users may make order if needed.